Steel Box Covers - 4-in Square Covers

Device Boxes TP513 4 in square 1/2 in raised steel cover with opening for a GFCI receptacle, mounting the device on a 4 in square box at correct wall projection.

Device Boxes TP472 flat blank steel cover for 4 in square boxes, used to close unused junction boxes and provide a code-compliant enclosure for splices.

Device Boxes TP516 4 in square 1/2 in raised steel cover for one duplex receptacle, converting a 4 in square box to a single duplex device opening with proper wall projection.

Device Boxes TP512 4 in square 1/2 in raised steel cover with single toggle-switch opening, mounts one switch on a 4 in square box and maintains correct device projection.

Device Boxes TP484 4 in square 1-gang 1/2 in raised steel switch ring, used to mount a single switch over a 4 in square box and bring the device flush to the wall finish.

Device Boxes TP510 4 in square 1/2 in raised steel cover with two duplex receptacle openings, allowing two duplex devices to be mounted on one 4 in square box.

Device Boxes TP521 4-11/16 in square deep steel outlet box with multiple knockouts, high-capacity junction or device box for commercial branch-circuit and lighting installations.

Device Boxes TP489 4 in square 1-gang 5/8 in raised steel device ring, provides additional projection for a single device over a 4 in square box where wall finishes are thicker.

Device Boxes TP515 4 in square 1/2 in raised steel cover with openings for one toggle switch and one GFCI receptacle, used to mount both devices on a single 4 in square box.

Device Boxes TP498 4 in square 2-gang 1/2 in raised steel ring, converts a 4 in square box to a 2-gang opening for switches or receptacles with standard wall thickness.