Steel Box Covers - 4-in Square Covers

Device Boxes TP514 4 in square 1/2 in raised steel cover with opening for one single receptacle or locking device, used to mount the device on a 4 in square box.

Device Boxes TP499 4 in square 2-gang 5/8 in raised steel ring, provides deeper projection for two-gang devices on 4 in square boxes with thicker wall finishes.

Device Boxes TP511 4 in square 1/2 in raised steel cover with two GFCI openings, mounts two GFCI receptacles on a single 4 in square box for high-density GFCI locations.

Device Boxes TP518 4 in square steel cover with 2-9/64 in round opening, for mounting locking or flanged receptacles on 4 in square boxes while providing mechanical support.

Device Boxes TP480 flat steel cover with 1-gang rectangular opening, used to mount a single switch or receptacle on a 4 in square box with minimal projection.

Device Boxes TP506 steel combination cover for 4 in square boxes, with openings for one duplex receptacle and one toggle switch, allowing both devices on a single box.

Device Boxes TP507 is a raised steel cover for a 4-inch square box. Its 1-19/32-inch round opening fits the specified single 20 A receptacle configuration, and the cover provides 5.5 cubic inches of capacity.

Device Boxes TP508 4 in square 1/2 in raised steel cover with two toggle-switch openings, allowing two switches to be mounted on one 4 in square box.

Device Boxes TP517 combination steel cover for 4 in square boxes, with openings for one GFCI receptacle and one duplex receptacle on the same box.

Device Boxes TP476 4 in square 1/2 in raised steel device cover with mounting ears, used where device alignment and support are needed independent of the box face.