Search in Category
Filter Your Search
Brand
Shop by Category
Steel Box Covers - 4-in Square Covers
Device Boxes TP486 4 in Square 1-Gang 3/4 in Switch Ring
Device Boxes TP486 4 in square 1-gang 3/4 in raised steel switch ring, used where additional projection is needed for a switch over thick wall finishes.
- Device ring
- For 4 in square boxes
- 1-gang
- 3/4 in raised
- Steel construction
Device Boxes TP490 4 in Square 1-Gang 1-1/4 in Device Ring
Device Boxes TP490 4 in square 1-gang 1-1/4 in raised steel device ring providing extra depth for switches or receptacles over heavily built-out wall finishes.
- Device ring
- For 4 in square boxes
- 1-gang
- 1-1/4 in raised
- Steel construction
Device Boxes TP478 4 in Square Flat Cover 1/2 in KO
Device Boxes TP478 flat steel cover for 4 in square boxes with a single 1/2 in knockout, used where a conduit entry is required while closing the remaining opening.
- Device box cover
- For 4 in square boxes
- Flat profile
- Single 1/2 in knockout
- Steel construction
Device Boxes TP488 4 in Square 1-Gang 1 in Device Ring
Device Boxes TP488 4 in square 1-gang 1 in raised steel device ring providing extra depth for switches or receptacles over 4 in square boxes with thick wall finishes.
- Device ring
- For 4 in square boxes
- 1-gang
- 1 in raised
- Steel construction
Device Boxes TP494 4 in Square 2-Gang Flat Switch Ring
Device Boxes TP494 4 in square 2-gang flat steel ring, converts a 4 in square box to a 2-gang opening for switches or devices without additional depth.
- Device ring
- For 4 in square boxes
- Flat profile
- 2-gang
Device Boxes TP504 4 in Square Cover for Single Receptacle and Switch
Device Boxes TP504 steel combination cover for 4 in square boxes with openings for one single receptacle and one toggle switch, allowing mixed devices on a single box.
- Device box cover
- For 4 in square boxes
- One single-receptacle opening
- One toggle-switch opening
- Steel construction
4 In. Square 1-Gang 1/4 In. Raised Ring
Steel 1-gang 1/4 Inch raised ring for 4 Inch square boxes; provides minimal projection for mounting a single device where wall finish is close to the box face.
- Device ring
- 4 in square box format
- 1/4 in raised
- 1-gang
4 In. Square 2-Gang 1-1/4 In. Raised Ring
Steel 2-gang 1-1/4 Inch raised device ring for 4 Inch square boxes; provides deep projection for two-gang device mounting over heavily built-out wall finishes.
- 4-inch square box
- 2-gang opening
- 1-1/4-inch raised
- Steel construction
- 14 cubic-inch capacity
Device Boxes TP477 Open-Ear Square Cover
TP477 is a steel cover for a 4-inch square box. It has a 5/8-inch raised opening with 2-3/4-inch ears and 5 cubic inches of capacity.
- 4-inch square box cover
- Steel construction
- Raised 5/8-inch opening
- Open with 2-3/4-inch ears
- 5 cubic-inch capacity
Device Boxes TP500 4 in Square 2-Gang 3/4 in Device Ring
Device Boxes TP500 4 in square 2-gang 3/4 in raised steel device ring, provides extra projection for two-gang device mounting on 4 in square boxes.
- Device ring
- For 4 in square boxes
- 2-gang
