Search in Category
Filter Your Search
Brand
Shop by Category
Steel Box Covers - 4-in Square Covers
4 In. Square 2-Gang 1 In. Raised Ring
Steel 2-gang 1 Inch raised device ring for 4 Inch square boxes; provides extra projection for two-gang device mounting over thick wall finishes.
- Device ring
- 4 in square box format
- 1 in raised
- 2-gang
TP653 3-Gang Steel Plaster Ring, 13/16 in Raised
TP653 is a 3-gang steel cover raised 13/16 in for plaster finishes. It provides device openings for a compatible gang box and positions the devices beyond the box face.
- 3-gang configuration
- Steel construction
- 13/16 in raised projection
- For compatible gang boxes
4 In. Square 1-Gang Flat Cover
Steel flat cover with 1-gang rectangular opening for 4 Inch square boxes; mounts a single switch or receptacle without additional depth.
- Box cover
- 1-gang
- Flat profile
4 In. Square 1-Gang Tile Ring 1-1/2 In. Raised
Steel 1-gang tile ring with 1-1/2 Inch raised projection for 4 Inch square boxes; used to bring device opening flush with thick tile or masonry wall finishes.
- Device ring
- 4 in square box format
- 1-1/2 in raised
- 1-gang
4 In. Square Box Cover
Steel cover for 4 Inch square boxes; used to close junction boxes or finish unused device openings.
- Box cover
- 4 in square box format
TP496 4 In. Square 2-Gang 1/4 In. Raised Steel Device Ring
TP496, 4 Inch square 2-gang 1/4 Inch raised steel plaster ring. Converts a 4 Inch square box to a 2-gang opening with minimal projection for flush wall finishes.
- Device ring
- 2-gang
4 In. Square 2-Gang Tile Ring 1-1/2 In. Raised
Steel 2-gang tile ring with 1-1/2 Inch raised projection for 4 Inch square boxes; used to bring two-gang device opening flush with thick tile or masonry finishes.
- Device ring
- 4 in square box format
- 1-1/2 in raised
- 2-gang
TP655 4-Gang Steel Plaster Ring, 13/16 in Raised
TP655 is a four-gang steel cover raised 13/16 in for plaster finishes. It provides device openings for a compatible gang box and adds 18.3 cu in of capacity.
- Four-gang configuration
- Steel construction
- 13/16 in raised projection
- 18.3 cu in capacity
TP509 4 In. Square Raised Steel Cover for 30–60A Receptacle
TP509, 4 Inch square raised steel cover with a large opening for one 30 to 60 Amp receptacle. Used to mount heavy-duty locking or straight-blade devices on a 4 Inch square box.
- For 4 in square boxes
- 2-7/16 in round device opening
- Raised steel cover
- 5.5 cu in capacity
TP519 Twist-Lock Receptacle Cover, 1-23/32 in Opening
TP519 is a raised steel cover for a 4-inch square box. Its 1-23/32-inch opening is specified for one compatible 30 A twist-lock receptacle, and the cover provides 5.5 cubic inches of capacity.
- For 4 in square boxes
- 1-23/32 in round device opening
- Raised steel cover
- 5.5 cu in capacity
