Search in Category
Filter Your Search
Brand
Shop by Category
Steel Box Covers - 4-in Square Covers
34S Square Swivel Fixture Hanger
34S is a steel ball-swivel fixture hanger for a 4 in square box. It accommodates 1/2- or 3/4-inch stems, allows 20 degrees of swing from vertical, and supports up to 50 pounds.
- Steel construction
- Fits 4 in square box
- 1/2 or 3/4 in stem
- 20 degrees of swing from vertical
- 50 lb support capacity
4 In. Square 1-Gang Tile Ring 1-1/4 In. Raised
Steel 1-gang tile ring with 1-1/4 Inch raised projection for 4 Inch square boxes; used to bring device opening flush to thick tile or masonry finishes.
- Device ring
- 4 in square box format
- 1-1/4 in raised
- 1-gang
4-inch square extension ring
Eaton Crouse-Hinds TP426 is a 4-inch square extension ring. Box size: 4". Depth: 1-1/2". Capacity: 21 cubic in. Material: Steel. Construction: Drawn. Side knockouts: (8) 3/4 in.
Match the cover or ring size and configuration to the existing box. Raised height and available wiring space matter when completing the device installation.
- Box size: 4".
- Depth: 1-1/2".
- Capacity: 21 cubic in.
- Material: Steel.
- Construction: Drawn.
- Side knockouts: (8) 3/4 in.
4 In. Square Box Cover
Steel flat cover for 4 Inch square boxes; closes junction boxes or provides a finished surface over unused device openings in walls or ceilings.
- Box cover
- 4 in square box format
TP667 6-Gang Steel Plaster Ring, 13/16 in Raised
TP667 is a 6-gang steel cover raised 13/16 in for plaster finishes. It provides device openings for a compatible gang box and positions the devices beyond the box face.
- 6-gang configuration
- Steel construction
- 13/16 in raised projection
- For compatible gang boxes
4 In. Square Box Cover
Steel flat cover for 4 Inch square boxes; used to close junction boxes or provide a blank finish over unused outlets.
- Box Cover
- 4 in nominal size
- Square
4 In. Square 1-Gang Tile Ring 2 In. Raised
Steel 1-gang tile ring with 2 Inch raised projection for 4 Inch square boxes; used to bring device opening flush with very thick tile or masonry wall finishes.
- Device Mounting Ring
- 2 in raised projection
- 1 gang
TP532 4 in Square Two-Device Tile Ring, 1/2 in Raised
TP532 is a steel tile-wall cover for a 4 in square electrical box. It has openings for two devices, a 1/2 in raised profile and 5 cu in capacity.
- For 4 in square boxes
- Two-device opening
- 1/2 in raised
- 5 cu in capacity
- Steel construction
TP534 2-Gang 4 in Square Device Ring
TP534 is a 2-gang 4 in square device ring.
- 4 in square box size
- 2-gang configuration
4 In. Square 2-Gang Tile Ring 1 In. Raised
Steel 2-gang tile ring with 1 Inch raised projection for 4 Inch square boxes; used to bring two-gang device opening flush with tile or masonry wall finishes.
- Device Mounting Ring
- 1 in raised projection
- 2 gang
