Relays

Compact encapsulated relay with 1 Form C 10A contact and 24V AC/DC coil, ideal for fan shutdown, door holders and other fire alarm control interfacing.

End-of-line epoxy encapsulated (SPST) relay. An epoxy encapsulated, single-pole single-throw, normally open relay that can be used as an end of line device in fire alarm systems.

MR-200 DPDT 10A control relay in red enclosure with status LED; accepts 24V DC/AC or 120/230V AC inputs for flexible isolation and load control of fire and HVAC equipment.

Gamewell FCI AOM-2SF is an addressable supervised output control module for notification appliances. It switches an external power supply and reports normal, open or short-circuit wiring status to the fire alarm panel.

Encapsulated Form C relay with built-in end-of-line resistor for 12/24V notification or control circuits, simplifying supervision and field wiring.

Single-position multi-voltage control relay in red enclosure with LED indication, used to isolate panel outputs, switch auxiliary loads and provide extra contacts.

Encapsulated 10A Form C relay with wide 9–40VDC coil range, perfect for switching higher-current fans, dampers or door hardware from low-voltage control signals.

Low-profile Form C relay with 12/24VDC coil, ideal for elevator recall, damper control, door release and other general-purpose interfacing from fire alarm outputs.

Supervisory relay module rated 18–32VDC with Form C contact, used to monitor power supplies, fans or valve positions and report status back to the FACP.

SSU-MR-199X-13CR is a gray relay cabinet.