Search in Category
Filter Your Search
Brand
Shop by Category
Elbow's
2 In. 90° Galvanized Rigid Conduit Elbow
Galvanized steel 90° elbow for 2 Inch rigid conduit. Hot-dip galvanized for corrosion resistance; used for right-angle turns in rigid conduit systems.
- Rigid conduit elbow
- 2 in trade size
- 90-degree bend
- Galvanized steel
HL5000 1/2-Inch EMT / Rigid 90-Degree Pulling Elbow
HL5000 is a 1/2-inch zinc die-cast pulling elbow with a removable cover and gasket. Its combination hubs accept threaded rigid conduit or set-screw EMT connections. It is raintight when used with rigid conduit and concrete-tight when taped for EMT use.
- 1/2-inch trade size
- Zinc die-cast body; cover and gasket
- Combination threaded rigid / set-screw EMT hubs
- Raintight with rigid; concrete-tight when taped for EMT
1 In. 90° Galvanized Rigid Conduit Elbow
Galvanized steel 90° elbow for 1 Inch rigid conduit. Hot-dip galvanized for corrosion resistance; used for right-angle turns in rigid conduit systems.
- Rigid conduit elbow
- 1 in trade size
- 90-degree bend
- Galvanized steel
3 In. 90° Galvanized Rigid Conduit Elbow
Galvanized steel 90° elbow for 3 Inch rigid conduit. Hot-dip galvanized for corrosion resistance; used for right-angle turns in rigid conduit systems.
HL7500 3/4-Inch EMT / Rigid 90-Degree Pulling Elbow
HL7500 is a 3/4-inch zinc die-cast pulling elbow with a removable cover and gasket. Its combination hubs accept threaded rigid conduit or set-screw EMT connections. It is raintight when used with rigid conduit and concrete-tight when taped for EMT use.
- 3/4-inch trade size
- Zinc die-cast body; cover and gasket
- Combination threaded rigid / set-screw EMT hubs
- Raintight with rigid; concrete-tight when taped for EMT
4 In. 90° Galvanized Rigid Conduit Elbow
Galvanized steel 90° elbow for 4 Inch rigid conduit. Hot-dip galvanized for corrosion resistance; used for right-angle turns in rigid conduit systems.
- Rigid conduit elbow
- 4 in trade size
- 90-degree bend
- Galvanized steel
1/2 In. 90° Galvanized Rigid Conduit Elbow
Galvanized steel 90° elbow for 1/2 Inch rigid conduit. Hot-dip galvanized for corrosion resistance; used to make right-angle turns in rigid conduit systems.
3/4 In. 90° Galvanized Rigid Conduit Elbow
Galvanized steel 90° elbow for 3/4 Inch rigid conduit. Hot-dip galvanized for corrosion resistance; used for right-angle turns in rigid conduit systems.
Fitting 6622 2 Inch 22-1/2° Rigid Conduit Elbow
Fitting 6622 factory-bent 22-1/2 degree elbow for 2 Inch rigid or IMC conduit, threaded ends for easy installation where a small change in direction is required.
1-1/4 In. 90° Galvanized Rigid Conduit Elbow
Galvanized steel 90° elbow for 1-1/4 Inch rigid conduit. Hot-dip galvanized for corrosion resistance; used for right-angle turns in rigid conduit systems.
