Search in Category
Filter Your Search
Brand
Shop by Category
EMT Die Cast Fittings
161 1/2 in 90-Degree EMT Set-Screw Connector
161 is a 1/2-inch 90-degree EMT set-screw connector made of zinc die-cast.
- 1/2 in trade size
- 90-Degree EMT Set-Screw Connector
- Zinc die-cast
Fitting 2 in Plastic Insulating Bushing
Nonmetallic 2 Inch insulating conduit bushing for rigid or IMC threaded hubs, used with a locknut to protect conductor insulation and provide a smooth radius at box or enclosure entries.
- Insulating conduit bushing
- 2 in trade size
- Nonmetallic construction
- Conductor insulation protection
Fitting 1 in 2-Screw NM/SE Cable Connector
Zinc die-cast 1 Inch two-screw service-entrance cable connector for NM or SE cable, clamp-type for 1 Inch knockout openings with locknut, suitable for interior terminations to panels or junction boxes.
- Service-entrance cable connector
- 1 in trade size
- Two-screw clamp
- Zinc die-cast body
Fitting 2 in 2-Screw NM/SE Cable Connector
Zinc die-cast 2 Inch two-screw clamp connector for NM or SE round service-entrance cable, securing cable to a 2 Inch knockout and bonding to the box or enclosure with the included locknut.
- Service-entrance cable connector
- 2 in trade size
- Two-screw clamp
- Zinc die-cast body
Fitting 1 in Plastic Insulating Bushing
Nonmetallic 1 Inch insulating conduit bushing that threads on rigid or IMC hubs with a locknut to provide a smooth bearing surface and protect conductor jackets entering enclosures.
- Insulating conduit bushing
- 1 in trade size
- Nonmetallic construction
- Conductor insulation protection
Fitting 1-1/4 in Plastic Insulating Bushing
Nonmetallic 1-1/4 Inch insulating conduit bushing for rigid or IMC threaded hubs, used with a locknut to shield conductor insulation from sharp conduit edges at panel or box entrances.
- Insulating conduit bushing
- 1-1/4 in trade size
- Nonmetallic construction
- Conductor insulation protection
Fitting 1-1/4 in 2-Screw SE Cable Connector
Zinc die-cast 1-1/4 Inch two-screw service-entrance cable connector; clamps cable jacket and mounts in 1-1/4 Inch knockouts, providing secure mechanical and electrical bonding to the enclosure.
- Service-entrance cable connector
- 1-1/4 in trade size
- Two-screw clamp
- Zinc die-cast body
Fitting 1/2 in Offset Rigid Nipple
Double-threaded offset nipple for 1/2 Inch rigid or IMC conduit; offsets misaligned knockouts and provides a short, bonded connection between enclosures or raceways.
- Offset conduit nipple
- 1/2 in trade size
- Threaded connection
Fitting 1-1/2 in Plastic Insulating Bushing
Plastic insulating bushing for 1-1/2 Inch rigid or IMC conduit; installs on locknut or threaded hub to protect conductor insulation at enclosure entry points.
- Insulating conduit bushing
- 1-1/2 in trade size
- Nonmetallic construction
- Conductor insulation protection
Fitting 3/4 in Plastic Insulating Bushing
Nonmetallic insulating bushing for 3/4 Inch rigid or IMC conduit; threads on locknut or hub to protect conductor insulation as it enters boxes.
- Insulating conduit bushing
- 3/4 in trade size
- Nonmetallic construction
- Conductor insulation protection
