Search in Category
Shop by Category
EMT Die Cast Fittings
Arlington EMT100 1 In. EMT NM Terminator
Plastic terminator for 1 Inch EMT sleeves; snaps on conduit end to protect NM cable or conductors from sharp edges when pulled through EMT.
- EMT terminator
- 1 in nominal size
Fitting 1-1/2 in EMT NM Terminator
Plastic terminator for 1-1/2 Inch EMT; protects NM cable or conductors pulled through short EMT sleeves.
- EMT terminator
- 1-1/2 in nominal size
ON-15 1-1/2 In. Die-Cast Offset Nipple
ON-15, double-threaded 1-1/2 Inch offset nipple for rigid or IMC conduit. Corrects misaligned knockouts and provides a short bonded connection between enclosures.
- Model: 6A6
- Product type: Offset nipple
- Trade size: 1-1/2 in
- Die-cast construction
ON-25 2-1/2 In. Die-Cast Offset Nipple
ON-25, double-threaded 2-1/2 Inch offset nipple for rigid or IMC conduit. Corrects misaligned knockouts and connects enclosures with short bonded coupling.
- Model: 6A8
- Product type: Offset nipple
- Trade size: 2-1/2 in
- Die-cast construction
1-1/2 In. Die-Cast Insulated Knockout Hub
Die-cast insulated hub for 1-1/2 Inch rigid or IMC; mounts in box wall to provide threaded, insulated entry for conduit.
- Die-cast insulated conduit hub
- 1-1/2 in nominal size
Fitting 1 in Offset Rigid Nipple
Double-threaded offset nipple for 1 Inch rigid or IMC; corrects small misalignments between box knockouts.
- Model: 6A4
- Product type: Offset nipple
- Trade size: 1 in
- Die-cast construction
GC50 Zinc Grounding Connector for 1/2 in Knockout
GC50 secures a grounding electrode conductor at a 1/2 in knockout in a metal panel or enclosure. Its zinc body accepts #8 to #2 AWG solid or stranded copper or aluminum conductors.
- Zinc body
- 1/2 in knockout
- Accepts #8 to #2 AWG conductors
- For solid or stranded copper or aluminum grounding wire
1/2 In. Die-Cast Insulated Knockout Hub
Die-cast insulated hub for 1/2 Inch rigid or IMC; mounts through box wall to provide threaded entry and insulated throat protecting conductor insulation.
- Die-cast insulated conduit hub
- 1/2 in nominal size
4 In. Die-Cast Insulated Knockout Hub
Die-cast insulated hub for 4 Inch rigid or IMC; mounts in box wall to provide threaded, insulated entry for large conduit.
- Die-cast insulated conduit hub
- 4 in nominal size
3/4 In. Die-Cast Insulated Knockout Hub
Die-cast insulated hub for 3/4 Inch rigid or IMC; mounts through box wall for threaded, insulated conduit entry.
- Die-cast insulated conduit hub
- 3/4 in nominal size
Brand



