Search in Category
Filter Your Search
Brand
Shop by Category
Clips,Straps - Staples
SC4050 Aluminum one-hole foldover strap for 4/0 service-entrance cable
SC4050 is an aluminum one-hole foldover strap for 4/0 service-entrance cable.
- Aluminum construction
- One mounting hole
- For 4/0 service-entrance cable
Milwaukee MNM1-600 Cable Fasteners
Milwaukee MNM1-600 insulated staples secure electrical cable to wood during rough-in. The 1-inch staples are supplied as 600 pieces in strips of 20 and fit only the Milwaukee M12 cable stapler. Approved NM-B configurations include single 14/2 through 10/3 and double-stacked 14/2, 14/3, 12/2, 12/3 and 10/2.
- 600 pieces per box, 20 per strip
- M12 cable stapler only
- Single-cable and specified stacked NM-B configurations
- Low-voltage cable applications
Buchanan BSER2-25 Insulated Cable Nail Strap
Buchanan BSER2-25 insulated cable nail strap for fastening cable to wood framing, molded saddle with integral nails to protect the cable jacket and provide secure support.
- For #2 SER cable or 3/4 in EMT conduit
- Smooth plastic saddle
- Zinc-plated nails
3/0–4/0 2-Hole SEU Cable Strap
Plated steel two-hole strap for 3/0 to 4/0 SEU cable; fastens service-entrance cable to framing or masonry with two fasteners for mechanical support.
- SEU cable strap
- Two-hole mounting
- Steel construction
Fitting 2/0–3/0 2-Hole SEU Cable Strap
Steel two-hole strap sized for 2/0–3/0 SEU cable; anchors flat service-entrance cable to siding or masonry for secure mechanical support.
- SEU cable strap
- Two-hole mounting
- Steel construction
Buchanan BSER4/0-5 Insulated Cable Nail Strap
Buchanan BSER4/0-5 insulated cable nail strap, used to secure larger service and feeder cables to studs and joists while maintaining proper spacing and jacket protection.
- For 4/0 SER cable
- Smooth plastic saddle
- Zinc-plated nails
King 06023 10–14 AWG Insulated Staples Box of 100
King 06023 box of 100 insulated cable staples for 10–14 AWG NM-ROMEX and thermostat cable, used to fasten branch-circuit wiring along studs, joists, and rafters.
- Insulated cable staples
- 10-14 AWG cable size
- 100 staples per box
SN300IB100N 13/16 in x 1-3/8 in insulated cable staple
SN300IB100N is a 13/16 in x 1-3/8 in insulated cable staple.
- 13/16 in width
- 1-3/8 in length
- Zinc-plated steel with gray plastic insulator
A&G 1661 1-1/2 x 2-3/4 Steel Nail Plate
A&G 1661 steel protective nail plate, 1-1/2 Inch x 2-3/4 Inch, used by electricians and plumbers to shield cable or pipe where it passes through studs near the edge, helping meet code for nail-strike protection.
- Protective nail plate
- Steel construction
- 1-1/2 × 2-3/4 in dimensions
Buchanan BSER6-50 Insulated Cable Nail Strap
Buchanan BSER6-50 insulated cable nail strap for heavy-duty cable runs, providing a cushioned support and nail-on mounting for SER and feeder conductors.
- For #6 SER cable or 1/2 in EMT conduit
- Smooth plastic saddle
- Zinc-plated nails
