500 Series

Steel surface raceway channel sold per foot, part of the Wiremold V500 metal raceway system. Used to route branch-circuit wiring or low-voltage cabling on finished walls and ceilings where conduit or in-wall wiring is impractical.

2-1/2 in support clip used with Wiremold metal surface raceway boxes and fittings. Helps support fixture or device boxes from V500/V700 raceway channels in commercial and light-industrial installs.

Standard-depth 1-gang device box for mounting switches or receptacles on Wiremold V500/V700 raceway. Provides a surface-mounted junction and device location for branch-circuit wiring.

1-gang flush extension ring that adapts Wiremold surface raceway boxes to existing flush wall boxes. Provides extra depth and a clean, finished look when tying wiremold raceway into in-wall wiring.

2-3/4 in internal corner elbow for the Wiremold V500 surface raceway system. Provides a neat inside-corner transition while protecting conductors in wiremold runs along walls or ceilings.

Shallow 1-gang box for switch or receptacle devices used with Wiremold metal surface raceway. Ideal where depth is limited and a low-profile wiremold box is needed.

2 in 90-degree flat elbow fitting for the Wiremold V500 metal surface raceway. Turns the raceway horizontally around inside or outside corners on the same plane while maintaining conductor capacity.

Combination surface box that accepts both a switch and receptacle in one enclosure. Designed for Wiremold V500/V700 surface raceway to create compact switch/receptacle stations on existing walls.

2-1/2 in combination connector for transitioning Wiremold metal raceway to conduit, armored cable, or non-metallic sheathed cable. Commonly used at panelboards or junction boxes in surface raceway installations.

2-gang surface box for mounting two wiring devices on Wiremold surface raceway runs. Used for double-gang switch banks, GFCI plus receptacle, or other multi-device wiremold applications.