Search in Category
Filter Your Search
Brand
Shop by Category
Strut Fittings
B-Line B422-1ZN Zinc-Plated Right Angle Clamp, 1 In.
B-Line B422-1ZN, zinc-plated right angle clamp sized for 1 Inch conduit or pipe. Used in strut support systems to mount conduit perpendicular to channel runs.
BLINE1 B393-1AL AL WIRING STUD HGR - 267134913
BLINE1 B393-1AL AL WIRING STUD HGR AL WIRING STUD HGR
Fitting 2111 1/4-20 Zinc Spring Nut
Fitting 2111 1/4-20 zinc-plated spring nut for strut channel, with captive spring to hold position during hardware installation.
- 1/4-20 thread
- Zinc-plated steel
- Spring nut for strut channel
Fitting 2112 3/8-16 Zinc Spring Nut
Fitting 2112 3/8-16 zinc-plated spring nut for use in strut channel systems, ideal for mounting hangers, clamps, and other hardware.
- 3/8-16 thread
- Zinc-plated steel
- Spring nut for strut channel
Eaton B-Line B115ZN Four-Hole Angle Connector
Eaton B-Line B115ZN 90-degree angle connector for strut framing, four pre-punched holes for 3/8 in hardware, zinc-plated steel for connecting two channels at right angles.
- 90-degree strut angle fitting
- Four holes
- Zinc-plated steel
Eaton B-Line B201ZN 3/8 in Square Strut Washer
Eaton B-Line B201ZN square washer for strut framing, sized for 3/8 in bolts or threaded rod with 7/16 in hole, zinc-plated steel for use with B-Line channel.
- 3/8 in nominal hardware size
- 7/16 in hole
CADDY PSF6C Pyramid Rooftop Strut Support
PSF6C is a Pyramid ST fixed strut support for mounting electrical or mechanical services on commercial rooftops. It combines a hot-dip-galvanized strut profile with a UV-stabilized base and a foam pad that cushions the roof membrane.
- Fixed rooftop strut support
- Hot-dip-galvanized strut profile
- UV-stabilized base
- Foam underside protects roof membrane
Eaton B-Line B280SQZN Centered Post Base
Eaton B-Line B280SQZN centered square post base fits B22 strut channel. The electro-plated steel base measures 6 inches by 6 inches and stands 3.5 inches high.
- Centered square post base
- Fits B22 channel
- 6 × 6 inch base
- 3.5 inch height
- Electro-plated steel
Eaton B-Line B248ZN Open Angle Fitting
The Eaton B-Line B248ZN is a four-hole 45-degree open angle for strut framing connections. It is made of electro-plated steel, 1/4 inch thick.
- Four-hole 45-degree open angle
- Steel construction
- Electro-plated finish
- 1/4 inch thick
Caddy ERC SCH6B 3/8 in EMT to Strut Clip
Caddy ERC SCH6B 3/8 EMT-to-strut clip for small conduit or tubing on Caddy channel.
