Search in Category
Filter Your Search
Brand
Shop by Category
Screws and Bolts
M-TAL JRM83 6-32 x 2 in RH Machine Screw
M-TAL JRM83 6-32 × 2 in round-head machine screw, zinc-plated, for long-reach fastening of devices, covers, and hardware into tapped 6-32 holes or with matching nuts.
- 6-32 thread
- 2 in length
- Round-head machine screw
- Zinc-plated finish
JDS185 #10 x 2 in Slotted Hex Sheet-Metal Screw
JDS185 is a #10 × 2 inch zinc-plated steel sheet-metal screw with a slotted hex washer head. Its tapping thread is used for fastening sheet-metal components.
- #10 diameter
- 2 in length
- Slotted hex washer head
- Zinc-plated steel
- Sheet-metal tapping screw
M-TAL JRM82 6-32 x 1-1/2 Machine Screw
M-TAL JRM82 6-32 × 1-1/2 in machine screw, zinc-plated steel, suitable for device mounting, cover plates, and hardware where standard 6-32 threads with extended length are required.
- 6-32 thread
- 1-1/2 in length
- Zinc-plated steel machine screw
M-TAL JRM88 8-32 x 1-1/2 RH Machine Screw
M-TAL JRM88 8-32 × 1-1/2 in round-head machine screw, zinc-plated, for fastening boxes, straps, and hardware into tapped 8-32 holes or with matching machine nuts.
- 8-32 thread
- 1-1/2 in length
- Round-head machine screw
- Zinc-plated finish
M-TAL JRM89 8-32 x 2 in RH Machine Screw
M-TAL JRM89 8-32 × 2 in round-head machine screw, zinc-plated, for deep-box device mounting and hardware assemblies requiring long 8-32 fasteners.
- 8-32 thread
- 2 in length
- Round-head machine screw
- Zinc-plated finish
JDS184 #10 x 1-1/2 in Slotted Hex Sheet-Metal Screw
JDS184 is a #10 × 1-1/2 inch zinc-plated steel sheet-metal screw with a slotted hex washer head. Its tapping thread is used for fastening sheet-metal components.
- #10 diameter
- 1-1/2 in length
- Slotted hex washer head
- Zinc-plated steel
- Sheet-metal tapping screw
M-TAL JTS28 #10 x 1 in Phillips Tapping Screw
M-TAL JTS28 #10 × 1 in Phillips pan-head self-tapping screw, zinc-plated, for fastening into pre-drilled holes in sheet metal, channel, and light steel.
- #10 × 1 in screw
- Phillips drive
- Self-tapping design
- Zinc-plated finish
M-TAL JTS27 #10 x 3/4 in Phillips Tapping Screw
M-TAL JTS27 #10 × 3/4 in Phillips self-tapping screw, zinc-plated, for fastening sheet metal or brackets into pre-drilled holes in steel or aluminum.
- #10 × 3/4 in screw
- Phillips drive
- Self-tapping design
- Zinc-plated finish
M-TAL JDS182 #10 x 1 in 5/16 Hex Sheet Metal Screw
M-TAL JDS182 #10 × 1 in 5/16 in hex-head sheet metal screw, sharp point, zinc-plated, for fastening sheet metal, straps, and hardware to wood or light-gauge steel.
- #10 × 1 in screw
- 5/16 in hex head
- Sharp point
- Zinc-plated finish
JWDS1C #8 x 1/2 in Phillips Wafer-Head Screw
JWDS1C is a #8 × 1/2 inch zinc-plated steel screw with a Phillips wafer head and self-drilling point. The wide, low-profile head provides a broad bearing surface for thin-metal fastening.
- #8 diameter
- 1/2 in length
- Phillips wafer head
- Self-drilling point
- Zinc-plated steel
