Nuts - Washers and Rod

M-TAL JC12C zinc-plated No. 12 jack chain for suspending light fixtures, signage, and cord drops; open-link design allows easy cutting and attachment with S-hooks or eyelets.

M-TAL JW113 1/4 in fender washer with 1 in OD, zinc-plated steel, used where a larger bearing surface is needed under bolt heads, nuts, or screw heads.

M-TAL JW116 1/4 in fender washer with 1-1/4 in OD, zinc-plated steel, provides extra bearing surface to cover oversized holes and distribute load on thin sheet metal or wood.

M-TAL TRS8/6B 3/8-16 × 6 in fully threaded steel rod, zinc-plated, for hanging conduit, cable tray, and equipment when used with beam clamps, rod couplings, and concrete inserts.

M-TAL JW119 3/8 in fender washer with 1-1/4 in OD, zinc-plated steel, used to spread clamp load on thin materials and cover oversized clearance holes.

M-TAL JN165 3/8-16 UNC zinc-plated hex finish nut for use with 3/8 in threaded rod and bolts in strut racks, trapeze hangers, and general mechanical fastening.

M-TAL JN163 1/4-20 UNC zinc-plated hex finish nut for use with 1/4 in machine screws and threaded rod in electrical supports, brackets, and general hardware assemblies.

M-TAL JLW174 3/8 in split lock washer, zinc-plated steel, provides vibration-resistant spring tension under nuts and bolt heads in strut, hanger, and equipment mounting.

M-TAL TRS6/6B 1/4-20 × 6 in fully threaded zinc-plated rod, for hanging light fixtures, junction boxes, and supports when used with appropriate nuts and hardware.

M-TAL JW127 3/8 in fender washer with 1 in OD, zinc-plated steel, used where a larger bearing surface is needed under 3/8 in bolt heads or nuts.