3 Pole 240 Volt General Duty Non-Fusible

Eaton Cutler-Hammer DG322URB 3-pole 60 Amp 240 Volt AC general-duty non-fused safety switch in a NEMA 3R (N3R) rain-tight outdoor enclosure, used as a disconnect for roof-top units, pumps and other three-phase loads.

Eaton Cutler-Hammer DG321URB 3-pole 30 Amp 240 Volt AC general-duty non-fused safety switch in a NEMA 3R (N3R) rain-tight outdoor enclosure, used as a lockable line-of-sight disconnect for small three-phase loads.

Eaton Cutler-Hammer DG322UGB 3-pole 60 Amp 240 Volt AC general-duty non-fused safety switch in a NEMA 1 (N1) indoor enclosure, ideal where upstream fuses or breakers provide overcurrent protection and only a disconnect is required.

Eaton Cutler-Hammer DG323URB 3-pole 100 Amp 240 Volt AC general-duty non-fused safety switch in a NEMA 3R (N3R) rain-tight outdoor enclosure, used for feeder and equipment disconnecting means where fusing is provided ahead.

Eaton Cutler-Hammer DG323UGB 3-pole 100 Amp 240 Volt AC general-duty non-fused safety switch in a NEMA 1 (N1) indoor enclosure, for use as an equipment disconnect when overcurrent protection is supplied by upstream devices.

Eaton Cutler-Hammer DG321UGB 3-pole 30 Amp 240 Volt AC general-duty non-fused safety switch in a NEMA 1 (N1) indoor enclosure, used as a local disconnect for small motors and branch-circuit loads where overcurrent protection is provided elsewhere.

Eaton Cutler-Hammer DH322NGK 3-pole 60 Amp 240 Volt AC heavy-duty fusible safety switch in a NEMA 1 indoor enclosure, for use as a service or feeder disconnect in commercial installations.

Eaton Cutler-Hammer DH221NGK 30 Amp 240 Volt heavy-duty fusible safety switch in a NEMA 1 (N1) indoor enclosure, used as a disconnect for small feeders, motors, and HVAC equipment.

Eaton Cutler-Hammer DH221NRK 30 Amp 240 Volt heavy-duty fusible safety switch with NEMA 3R (N3R) rain-tight outdoor enclosure for service or feeder disconnecting means.

Eaton Cutler-Hammer DG324UGK 3-pole 200 Amp 240 Volt AC general-duty non-fused safety switch in a NEMA 1 (N1) indoor enclosure with grounding provisions, applied where upstream fuses or breakers provide protection.